• -10%
  • New
Wide Input LED Driver
Wide Input LED Driver
Wide Input LED Driver Wide Input LED Driver (Case Version 1)

Wide Input LED Driver

Reference: LEDC1512WND-V1

$27.60
$24.84 Save 10%

Super Efficient, 1.5 -12 Volts wide input, self regulating LED driver. Uses batteries or wall adapters. 

Quantity
LEDC1512WND-V1

Add to wishlist

  • Security policy: SSL Secured. For more information, see our 'Secure payment' link below. Security policy: SSL Secured. For more information, see our 'Secure payment' link below.
  • Delivery policy: USPS with tracking. For more information, see our 'Deliveries & Returns' link below. Delivery policy: USPS with tracking. For more information, see our 'Deliveries & Returns' link below.
  • Return policy:  Within 7 days of delivery. For more information, see our 'Deliveries & Returns' link below. Return policy: Within 7 days of delivery. For more information, see our 'Deliveries & Returns' link below.

Super Efficient, 1.5 -12 Volts Wide Input LED driver (Case Version 1). Operates for over 100 continuous hours using a single D cell or 30 hours from a single AA and will operate on input voltages of less than 1V!



  • This LED driver allows easy lighting on artwork, scale models and more! The small size footprint converter can be built directly into your work. Easy to use - power in / power out. Can be used to illuminate a string of LEDs wired in series (up to 15) with no noticeable decrease in light emission or parallel (up to 20).


    The driver is self regulating, so if you are using a series of 3 or 10 LEDs, the output voltage will adjust accordingly up to the LED and driver maximums. In parallel mode the current will self regulate to the ratings of the LEDs and driver itself, using more current for 15 LEDs wired in parallel or less if using a smaller number of LEDs.

    Use a power converter to incorporate into your solar lighting designs to be used when the the voltages are low. This converter will step it up to to a useful voltage! Depending on your design you may use the same converter to charge batteries for future storage! As long as your battery has 0.8 Volts or more you can use it!


    Includes: 

    • Detailed instructions

    • (1) LEDC1512WND- Pulse switched DC/DC converter (case color may vary)

       Two-Wire

      LEDC1512WND

      Size

      14mm x 12mm x 8mm

      Weight

      8g

      Input

      1.0/2.4V - (2.5V-12V wResistor 47 Ohm) @150mA Max. DC

      Output

      ~6-50V@100-150mA Pulses

      Consumption

      5-25mA

      LED Specs

      Typical: If=20mA, Vf=3.4 - 4.1V
      Super-Bright, Ultra-Bright, Mega-Bright, Hyper, COB

    * Converter may use a single AA, AAA, C, D cell, Solar Cells!

    * Converter may also be powered from standard wall adapters. Ratings: 1V - 12V@150mA Max

LEDC1512WND-V1
2020-08-01

Specific References

No customer reviews for the moment.

related products

5 other products in the same category:

Product added to compare.