

![]() ![]() |
Reference: IC-ESP8266ESP12
New D1 Mini NodeMCU ESP-12 WeMos ESP8266 - 8-Bit CMOS Flash Microcontroller.
MPN: ESP8266ESP12
BRAND: Espressif Systems
The D1 Mini NodeMCU also known as the ESP-12 WeMos is an ESP8266-based microcontroller featuring 11 digital input/output pins, a single analog input pin. It offers the convenience of a micro-USB connection for both power and data (running at 3.3V), and despite its size has built-in WiFi and 4MB of flash memory. It can be programmed with Lua / NodeMCU, MicroPython, and other leading micro-controller development platforms like t Arduino IDE. It supports both serial and OTA programming.
Includes three types of headers to support various configurations: Female, Male, Long Female
5V power from a MicroUSB connector is internally converted to 3.3V
Microcontroller Core Features:
• High performance RISC CPU - ESP-8266EX
• Clock Speed, 80MHz/160MHz
• Tensilica L106 32-bit micro controller unit (MCU) and a Wi-Fi transceiver
• Digital I/O Pins: 11, all pins have interrupt/PWMI2C/one-wire support except D0
• 802.11 b/g/n
• Integrated low power 32-bit MCU
• Integrated 10-bit ADC
• Integrated TCP/IP protocol stack
• Integrated TR switch, balun, LNA, power amplifier and matching network
• Integrated PLL, regulators, and power management units
• Supports antenna diversity
• WiFi 2.4 GHz, support WPA/WPA2
• Support STA/AP/STA+AP operation modes
• Support Smart Link Function for both Android and iOS devices
• SDIO 2.0, (H) SPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO
• STBC, 1x1 MIMO, 2x1 MIMO
• A-MPDU & A-MSDU aggregation & 0.4s guard interval
• Deep sleep power <10uA, Power down leakage current < 5uA
• Wake up and transmit packets in < 2ms
• Standby power consumption of < 1.0mW (DTIM3)
• +20 dBm output power in 802.11b mode
• Operating temperature range -40C ~ 125C
• FCC, CE, TELEC, WiFi Alliance, and SRRC certified
Dimensions:
• 34.2mm x 25.6mm x 6.8mm
• Weight: Approx. 5g excluding connectors
No customer reviews for the moment.